Step by StepAssembly Find your furniture

IKEA IVAR cabinet assembly instructions

How to assemble the IKEA IVAR cabinet, step by step: 13 animated steps built from the official manual, about 1–1.5 hours for 1 person, with Allen key 100101 (included), Phillips screwdriver, wall screws and plugs (not included).

IKEA IVAR cabinet, assembled

A solid pine IVAR cabinet: a dowelled and screwed frame built lying on its front, a slide-in back with a wall rail, two doors on clip-on hinges and two adjustable shelves. Size: 80x30x83 cm. About 1–1.5 hours, 1 person. Tools: Allen key 100101 (included), Phillips screwdriver, Wall screws and plugs (not included).

Based on the official IKEA manual AA-2272100-5 (PDF). Guide updated .

IVAR cabinet: quick facts
Steps13
Time1–1.5 hours
People1
ToolsAllen key 100101 (included), Phillips screwdriver, Wall screws and plugs (not included)
Size80x30x83 cm
Official manualAA-2272100-5
IKEA article number400.337.63 (pine)
Pieces in the box90

In the box

PartPart numberQuantity
Side panel2
Top / bottom board2
Back panel with wall rail1
Door2
Shelf2
Wooden dowel1013508
Connector screw1002148
Allen key1001011
Spacer100781704
Hinge mounting plate1092204
Screw10034416
Hinge1093364
Shelf pin 101532 (2 are spare, for stacking)10
Screw 100404 (for IVAR side units only)4
Bracket 10095544 (for IVAR side units only)6
Screw 109560 (for IVAR side units only)6
Angle bracket 102646 (for IVAR side units only)2
Screw 108458 (for IVAR side units only)2
Connecting plate 101827 (for stacking only)2
Screw 109535 (for stacking only)4

Steps

  1. Dowels in the top and bottom board — Lay the top and the bottom board flat, with the grooved side facing up. Push 2 wooden dowels 101350 into the holes in each end of both boards.
  2. Boards onto the first side panel — Stand a side panel on its front edge, shelf-pin holes facing in. Swing each board up onto its front edge, groove away from the floor, and push its dowels into the holes in the panel.
  3. Screw the boards on — From the outside of the side panel, fix each board with 2 connector screws 100214, using the Allen key 100101.
  4. Slide in the back panel — Slide the back panel into the grooves from the open end, with the solid wall rail along the top board, and push it all the way to the side panel.
  5. Second side panel — Push the other side panel onto the free ends of the boards, holes facing in, so the dowels and the back panel go into it. Fix it with 4 connector screws 100214 and the Allen key.
  6. Stand it up — Tip the cabinet up onto its bottom, then turn it round so the open front faces you.
  7. Hinge mounting plates — On the inside of each side panel, near the front edge, fit 2 mounting plates 109220: one near the top and one near the bottom. Put a spacer 10078170 behind each plate and fix the plate with 2 screws 100344.
  8. Against the wall — Put the cabinet where it will be used and push it back against the wall. It can stand on the floor or hang on the wall at the height you choose. Check: Used on IVAR side units or stacked on another IVAR cabinet? Then follow pages 11–16 of the manual instead of this step.
  9. Screw it to the wall — Drive 2 screws through the holes in the wall rail under the top into the wall. Check: The cabinet must be fixed to the wall. Screws and plugs are not included: choose ones that suit your wall (and the load, if the cabinet hangs).
  10. Hinges on the doors — Lay both doors face down, battens up. Press a hinge 109336 into each of the 2 round holes along the outer edge of each door, arm pointing out, and fix it with 2 screws 100344.
  11. Hang the doors — Hold each door open and slide its hinge arms onto the mounting plates in the cabinet until they click. Then tighten the screw on each hinge arm. Check: The hinges adjust the doors up and down, sideways and in and out (manual page 19). If the doors stand out from the cabinet, take out the spacers 10078170 (page 20).
  12. Shelf pins and shelves — Push 8 shelf pins 101532 into the holes in the side panels, 4 at the same height for each shelf. Lay the 2 shelves on the pins, then close the doors.
  13. Done! — Your IVAR cabinet is finished and fixed to the wall. Each shelf holds up to 30 kg and can be moved to other heights with the shelf pins.

IVAR cabinet: questions and answers

How long does it take to assemble the IKEA IVAR cabinet?

About 1–1.5 hours for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the IVAR cabinet?

Allen key 100101 (included), Phillips screwdriver, wall screws and plugs (not included). Already in the box: Allen key 100101.

Can one person assemble the IVAR cabinet?

Yes, it is a one-person build.

Does the IVAR cabinet need to be fixed to the wall?

The manual shows a wall fixing: see step 4 (Slide in the back panel) and step 9 (Screw it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the IVAR cabinet once assembled?

80x30x83 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the IVAR cabinet?

44 fittings of 6 kinds, the most numerous being 16 × screw, 8 × wooden dowel, 8 × connector screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA IVAR cabinet assembly instructions PDF?

The official PDF is manual AA-2272100-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 400.337.63 (pine); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2272100-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example wooden dowel 101350). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained