Step by StepAssembly Find your furniture

IKEA MÖRBYLÅNGA dining table assembly instructions

How to assemble the IKEA MÖRBYLÅNGA dining table, step by step: 13 animated steps built from the official manual, about 45 min for 2 people, with Allen key 100092 + handle 121030 (included), cross-head screwdriver, flat-blade screwdriver.

IKEA MÖRBYLÅNGA dining table, assembled

Solid-looking oak veneer dining table with a two-piece top joined by two long rails and two closed leg frames. Size: 140×85 cm. About 45 min, 2 people. Tools: Allen key 100092 + handle 121030 (included), Cross-head screwdriver, Flat-blade screwdriver.

Based on the official IKEA manual AA-1991660-3 (PDF). Guide updated .

MÖRBYLÅNGA dining table: quick facts
Steps13
Time45 min
People2
ToolsAllen key 100092 + handle 121030 (included), Cross-head screwdriver, Flat-blade screwdriver
Size140×85 cm
Official manualAA-1991660-3
IKEA article number503.862.45
Pieces in the box50

In the box

PartPart numberQuantity
Table top half2
Long rail2
Leg frame2
Screw12874522
Dowel 101352 (long)4
Dowel 101345 (short)4
Cam screw1183314
Cam lock1134344
Floor glide1175594
Allen key1000921
Allen-key handle1210301

Steps

  1. Rails on the two top halves — Lay both top halves upside down on a rug. Push 2 short dowels (101345) into the holes near the ends of each half, then press a long rail onto them, holes up. Check: Use the short dowels 101345 here, not the long 101352.
  2. Screw the rails to the halves — Screw 3 screws (128745) down through each rail into the top half: one near each end and one in the middle. Tighten them with the allen key in its handle.
  3. Cam screws in the leg frames — Lay both leg frames flat, inner side up. Screw 2 cam screws (118331) into the holes at the ends of the wide top rail of each frame with a cross-head screwdriver.
  4. Long dowels, then join the top — Push a long dowel (101352) into the hole beside each cam screw: 2 in each frame. Then slide the two top halves together so their long edges meet.
  5. Slide the first frame onto the rails — Turn a leg frame legs up, hold it at one end of the top and slide it along the top onto the rail ends, cam screws and dowels into the holes.
  6. Slide the second frame onto the rails — Turn the second frame legs up and slide it onto the other ends of the rails the same way.
  7. Lock the cam locks — Push a cam lock (113434) into the hole near each end of the two rails. Turn each one clockwise with a flat screwdriver until it grips the cam screw and pulls the frame tight. Check: Check that the two halves are flush at the joint: no step between them.
  8. First screws through the frames — Screw 2 screws (128745) down through the top rail of each leg frame into the top, tightened with the allen key in its handle.
  9. Screw the left frame to the top — Put 6 more screws (128745) through the top rail of the left frame: one near each leg and 4 near the joint, 2 into each half. Tighten them with the allen key.
  10. Screw the right frame to the top — Fix the right frame the same way with the last 6 screws (128745), tightened with the allen key.
  11. Push in the floor glides — Push a floor glide (117559) into the end of each leg by hand, until the disc sits flat on the leg.
  12. Turn the table upright — With two people, lift the table by the frames, tip it onto one long edge and then lower it onto its feet. Lift it rather than dragging it on the glides.
  13. Done! — Your MÖRBYLÅNGA dining table is ready.

MÖRBYLÅNGA dining table: questions and answers

How long does it take to assemble the IKEA MÖRBYLÅNGA dining table?

About 45 min for 2 people, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the MÖRBYLÅNGA dining table?

Allen key 100092 + handle 121030 (included), cross-head screwdriver, flat-blade screwdriver. Already in the box: Allen key 100092 + handle 121030.

Can one person assemble the MÖRBYLÅNGA dining table?

It is planned as a 2-person build. One person can do most of it, but get help for step 12, where the furniture is lifted or turned.

What size is the MÖRBYLÅNGA dining table once assembled?

140×85 cm, as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.

How many screws and fittings come with the MÖRBYLÅNGA dining table?

35 fittings of 5 kinds, the most numerous being 22 × screw, 4 × cam screw, 4 × cam lock. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA MÖRBYLÅNGA dining table assembly instructions PDF?

The official PDF is manual AA-1991660-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 503.862.45; other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1991660-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 128745). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All tables assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained