Step by StepAssembly Find your furniture

IKEA HOL storage table assembly instructions

How to assemble the IKEA HOL storage table, step by step: 8 animated steps built from the official manual, about 20–30 min for 1 person, with Allen key 100001 (included), hammer.

IKEA HOL storage table, assembled

An acacia lattice chest that doubles as a coffee table: four lattice panels and a plain bottom screwed together, with a loose lid on top. Size: 98x50 cm, 50 cm high (38 5/8x19 5/8", 19 5/8" high). About 20–30 min, 1 person. Tools: Allen key 100001 (included), Hammer.

Based on the official IKEA manual AA-81841-4 (PDF). Guide updated .

HOL storage table: quick facts
Steps8
Time20–30 min
People1
ToolsAllen key 100001 (included), Hammer
Size98x50 cm, 50 cm high (38 5/8x19 5/8", 19 5/8" high)
Official manualAA-81841-4
IKEA article number501.613.21 (acacia)
Pieces in the box25

In the box

PartPart numberQuantity
Long lattice panel (front and back)2
Lattice end panel2
Bottom with centre batten1
Lattice lid1
Screw10021410
Dowel1013504
Bumper1087874
Allen key1000011

Steps

  1. Stand the ends on the back — Lay one long lattice panel flat on the floor: this is the back. Push 2 dowels into the holes at its ends, stand the two lattice end panels on them, then push 2 more dowels into the holes in the top edges of the ends.
  2. Slide in the bottom — Slide the plain bottom straight down between the two end panels, along the edge where the feet stick out. The centre batten faces into the box.
  3. Screw on the front — Lay the second long lattice panel on top so it sits on the dowels. Fix it with 5 screws (100214) and the allen key: one at each corner into the end panels and one in the middle into the bottom's centre batten.
  4. Turn it over and screw on the back — Turn the box over so it lies on the front panel. Fix the back panel to the ends and the bottom batten with the other 5 screws, in the same places as before.
  5. Stand the box on its feet — Tip the box up so it stands on the feet of the end panels, open side up.
  6. Fit the bumpers to the lid — Lay the lid upside down on a soft surface. Push a bumper (108787) into the hole at each of the 4 corners and tap it home with a hammer.
  7. Put the lid on — Turn the lid the right way up and lay it on the box, bumpers down, so it rests evenly on all 4 corners.
  8. Done! — Your HOL storage table is ready. Lift the lid to store things inside. Check: Max load on the lid: 10 kg.

HOL storage table: questions and answers

How long does it take to assemble the IKEA HOL storage table?

About 20–30 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the HOL storage table?

Allen key 100001 (included), hammer. Already in the box: Allen key 100001.

Can one person assemble the HOL storage table?

Yes, it is a one-person build.

What size is the HOL storage table once assembled?

98x50 cm, 50 cm high (38 5/8x19 5/8", 19 5/8" high), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the HOL storage table?

18 fittings of 3 kinds, the most numerous being 10 × screw, 4 × dowel, 4 × bumper. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA HOL storage table assembly instructions PDF?

The official PDF is manual AA-81841-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 501.613.21 (acacia); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-81841-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 100214). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA HOL assembly guides · All tables assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained