IKEA RÅGRUND shelving unit assembly instructions
How to assemble the IKEA RÅGRUND shelving unit, step by step: 13 animated steps built from the official manual, about 45 min for 1 person, with Allen key (supplied), Phillips screwdriver, pencil, tape measure.
A slim bamboo bathroom tower: a deep four-shelf base topped by a shallower three-shelf section, built from four ladder-like side frames and seven shelves held with 30 Allen screws, then strapped to the wall. Size: 33x28x163 cm. About 45 min, 1 person. Tools: Allen key (supplied), Phillips screwdriver, Pencil, Tape measure.
Based on the official IKEA manual AA-840454-9 (PDF). Guide updated .
| Steps | 13 |
|---|---|
| Time | 45 min |
| People | 1 |
| Tools | Allen key (supplied), Phillips screwdriver, Pencil, Tape measure |
| Size | 33x28x163 cm |
| Official manual | AA-840454-9 |
| IKEA article number | 302.530.67 (bamboo) |
| Pieces in the box | 43 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Long side frame (with feet) | 2 | |
| Short side frame | 2 | |
| Deep shelf | 4 | |
| Narrow shelf | 3 | |
| Allen screw | 130608 | 30 |
| Allen key | 100006 | 1 |
| Anti-tip strap kit 128481 (strap, 2 washers, screw) | 1 |
Steps
- First long frame and the top shelf — Stand one long side frame on its edge with its feet to your left and the countersunk side of the holes facing you. Stand a plain deep shelf behind it at the top end (the end without feet), with the holes in its edge against the frame. Check: The wide, countersunk side of every hole must face out.
- Screw on the top shelf — Fix the shelf with 2 screws 130608, one through each post of the frame into the end of the shelf. Tighten them clockwise with the Allen key.
- Three more deep shelves — Stand the other plain deep shelf at the foot end and the 2 notched deep shelves in between, each at its pair of holes. Fix each one with 2 screws 130608 through the frame, 6 in total.
- Second long frame — Put the second long frame on the other ends of the 4 shelves, feet at the same end and countersunk holes facing out. Screw it on with 8 screws 130608, 2 for each shelf.
- Short section: frame and shelves — Build the short top section the same way. Stand a short frame on its edge and put the 3 narrow shelves against it: the 2 notched ones, and the plain one at the end away from the long section. Fix them with 6 screws 130608. Check: Countersunk holes face out.
- Short section: second frame — Put the second short frame on the other ends of the narrow shelves and fix it with 6 screws 130608.
- Join the sections and stand it up — Push the short section against the top end of the long one, backs level. From inside the top compartment, drive 1 screw 130608 through each top rung into the short section, 2 in total. Then lift the top end and stand the unit up on its feet.
- Mark the wall — Stand the unit where it will go, back against the wall. Reach in above the deep top shelf and draw a line on the wall along the top of the shelf, with a short upright tick in the middle. Check: The unit must be fixed to the wall with the anti-tip strap to stop it tipping over.
- Move the unit away — Move the unit straight out from the wall, so you can reach the line.
- Fix the strap to the wall — Measure 30 mm (1 3/8") down from the line and mark it. Screw the anti-tip strap 128481 to the wall there, with a washer, its free end pointing out at the top. Check: The wall screw is not included: use a screw (and plug) that suits your wall. Turn the strap the right way up.
- Push the unit back — Push the unit back against the wall, so the free end of the strap lies under the deep top shelf.
- Screw the strap to the shelf — Hold the strap up against the underside of the shelf and mark through its hole. Then screw it to the shelf with the screw and washer from the kit, using a Phillips screwdriver.
- Done! — Your RÅGRUND shelving unit is assembled and fixed to the wall.
RÅGRUND shelving unit: questions and answers
How long does it take to assemble the IKEA RÅGRUND shelving unit?
About 45 min for 1 person, working through the 13 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the RÅGRUND shelving unit?
Allen key (supplied), Phillips screwdriver, pencil, tape measure. Already in the box: Allen key.
Can one person assemble the RÅGRUND shelving unit?
Yes, it is a one-person build.
Does the RÅGRUND shelving unit need to be fixed to the wall?
The manual shows a wall fixing: see step 8 (Mark the wall) and step 10 (Fix the strap to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the RÅGRUND shelving unit once assembled?
33x28x163 cm, as given for this model. Leave extra floor space around it while you build.
Where can I download the IKEA RÅGRUND shelving unit assembly instructions PDF?
The official PDF is manual AA-840454-9, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 302.530.67 (bamboo); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-840454-9. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example allen screw 130608). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA RÅGRUND wash-basin/corner shelf assembly instructions
- IKEA RÅGRUND towel rack/chair assembly instructions
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
All IKEA RÅGRUND assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained