Step by StepAssembly Find your furniture

IKEA BAGGEBO bookcase assembly instructions

How to assemble the IKEA BAGGEBO bookcase, step by step: 15 animated steps built from the official manual, about 30–45 min for 1 person, with hammer, Phillips screwdriver, pencil, ruler, Allen key (included).

IKEA BAGGEBO bookcase, assembled

A slim white bookcase with 4 open compartments: 5 boards on dowels and screws, a folding back panel nailed on, and wall anchoring. Size: 50×25×160 cm. About 30–45 min, 1 person. Tools: Hammer, Phillips screwdriver, Pencil, Ruler, Allen key (included).

Based on the official IKEA manual AA-2235394-5 (PDF). Guide updated .

BAGGEBO bookcase: quick facts
Steps15
Time30–45 min
People1
ToolsHammer, Phillips screwdriver, Pencil, Ruler, Allen key (included)
Size50×25×160 cm
Official manualAA-2235394-5
IKEA article number204.367.13 (white)
Pieces in the box82

In the box

PartPart numberQuantity
Side panel2
Board5
Back panel (folding)1
Glide1226284
Wooden dowel10134520
Screw10022910
Allen key1000061
Nail10122130
Nail holder1054931
Wall bracket1069892
Screw1090412
Washer1008234

Steps

  1. Glides on the side panels — Lay both side panels flat on a rug or the empty box, inside (the side with the holes) facing up and the bottom ends the same way. Hammer 2 glides into the bottom edge of each panel, 4 in total. Check: Work on a soft surface so the panels do not get scratched.
  2. Dowels in, first side panel up — Stand the 5 boards on their front edges and push 2 wooden dowels into one end of each board, 10 in total. Turn one side panel up onto its front edge and press it onto the dowels.
  3. Screw the first side panel — Screw the side panel to each of the 5 boards with a screw 100229 through the hole on the outside, using the Allen key. 5 screws in total.
  4. Dowels in, second side panel up — Push 2 dowels into the free end of each board, 10 in total. Turn the second side panel up onto its front edge and press it onto the dowels.
  5. Screw the second side panel — Fix the second side panel to the 5 boards with the other 5 screws 100229, tightened with the Allen key.
  6. Mark the middle board — With the bookcase lying on its front, make a pencil mark on the back edge of both side panels in line with the middle board. Check: The marks show where to nail the back panel to the middle board later.
  7. Back panel on, first nail — Unfold the back panel and lay it on the back. Put a nail in the nail holder, hook the holder over the bottom edge in the middle, and hammer the nail into the bottom board. Check: Nail into the middle of the board edge. A nail that misses the centre can split the board.
  8. Square it up, nail a top corner — Push the back panel so it lines up exactly with the top board and the side panel at one top corner, then nail that corner. Check: The panel must be flush with both edges before you nail, so the bookcase is square.
  9. Nail the opposite bottom corner — Check the panel lines up with the edges at the opposite bottom corner, then nail it there.
  10. Draw the middle-board line — Lay a ruler across the back panel between the two pencil marks and draw a line, so you can see where the middle board is.
  11. Nail the back panel all round — Hammer 2 nails along the line into the middle board. Then nail the remaining 25: along both side panels, into the top board and into the bottom board.
  12. Stand it up — Tip the bookcase up onto its glides.
  13. Wall brackets in, screws loose — Screw a wall bracket to the inside of each side panel, at the back just under the top board, with a screw 109041 and a washer 100823. Leave the screws a little loose so the brackets can still slide. Check: Do not tighten the screws fully yet.
  14. Fix it to the wall — Place the bookcase against the wall. Slide each bracket back until it touches the wall and fix it with a washer 100823 and a screw that suits your wall. Then tighten the bracket screws. Check: Must be fixed to the wall so it cannot tip over. Wall screws and plugs are not included: use ones that suit your wall.
  15. Done! — Your BAGGEBO bookcase is assembled and fixed to the wall. Max load: 8 kg per shelf.

BAGGEBO bookcase: questions and answers

How long does it take to assemble the IKEA BAGGEBO bookcase?

About 30–45 min for 1 person, working through the 15 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the BAGGEBO bookcase?

Hammer, Phillips screwdriver, pencil, ruler, Allen key (included). Already in the box: Allen key.

Can one person assemble the BAGGEBO bookcase?

Yes, it is a one-person build.

Does the BAGGEBO bookcase need to be fixed to the wall?

The manual shows a wall fixing: see step 13 (Wall brackets in, screws loose) and step 14 (Fix it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the BAGGEBO bookcase once assembled?

50×25×160 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the BAGGEBO bookcase?

73 fittings of 8 kinds, the most numerous being 30 × nail, 20 × wooden dowel, 10 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA BAGGEBO bookcase assembly instructions PDF?

The official PDF is manual AA-2235394-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 204.367.13 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2235394-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example glide 122628). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA BAGGEBO assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained