IKEA BAGGEBO shelving unit (metal, white) assembly instructions
How to assemble the IKEA BAGGEBO shelving unit (metal, white), step by step: 8 animated steps built from the official manual, about 30–45 min for 1 person, with Phillips screwdriver, screws and plugs for the wall (not included).
White powder-coated steel shelving: four perforated shelves and a small perforated back panel screwed between four square legs, then fixed to the wall. Size: 60×25×116 cm (23 5/8×9 7/8×45 5/8"). About 30–45 min, 1 person. Tools: Phillips screwdriver, Screws and plugs for the wall (not included).
Based on the official IKEA manual AA-2235400-4 (PDF). Guide updated .
| Steps | 8 |
|---|---|
| Time | 30–45 min |
| People | 1 |
| Tools | Phillips screwdriver, Screws and plugs for the wall (not included) |
| Size | 60×25×116 cm (23 5/8×9 7/8×45 5/8") |
| Official manual | AA-2235400-4 |
| IKEA article number | 504.811.72 |
| Pieces in the box | 55 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Leg | 4 | |
| Shelf | 4 | |
| Back panel | 1 | |
| Screw | 10119123 | 38 |
| Levelling foot | 10003068 | 4 |
| Wall bracket | 10062215 | 2 |
| Washer | 100827 | 2 |
Steps
- Front legs and the top shelf — Lay 2 legs side by side on a soft surface, the ends with the threaded hole for the feet at the same end. Stand the top shelf on its front edge between the other ends, flush with them, with the back edge (the one with 2 holes) facing up. Screw each lower corner tab to its leg with 2 screws (10119123): 4 screws. Check: Work on a rug or the cardboard from the box so neither the floor nor the white coating gets scratched.
- The other 3 shelves — Stand the other 3 shelves on the front legs in the same way, each with its back edge (2 holes) facing up. Screw each lower corner tab to its leg with 2 screws (10119123): 12 screws. Check: Check every shelf: the edge with the 2 holes must face up (it is the back). The back panel and the wall brackets are screwed into those holes later.
- The back legs on top — Lay the other 2 legs on the upper corner tabs of all 4 shelves, threaded ends at the same end as the front legs. Screw every tab to its leg from underneath with 2 screws (10119123): 16 screws.
- Back panel — Lay the perforated back panel into the back of the middle compartment (between the 2nd and 3rd shelf from the top), its 2 flanges pointing down into the unit. Fix it with 4 screws (10119123), all pointing towards the top shelf: 2 from inside the compartment through the flange into the upper shelf, and 2 from the feet side through the lower shelf into the other flange.
- Levelling feet — Screw a levelling foot (10003068) clockwise by hand into the threaded end of each of the 4 legs.
- Stand it up, hang the wall brackets — Stand the unit up on its feet. Under the back edge of the top shelf, hang a wall bracket (10062215) in each of the 2 holes, upright leg pointing down at the back. Fix each with a washer (100827) and a screw (10119123), but only loosely so the bracket can still slide. Check: The washer goes between the bracket and the screw head: without it the screw head slips through the slot.
- Fix it to the wall — Place the unit against the wall. Slide each bracket back along its slot until its upright leg touches the wall, screw it to the wall with a screw and plug that suit your wall, then tighten the bracket screw (10119123) firmly. Check: Must be fixed to the wall to prevent it tipping over. Wall screws and plugs are not included: ask in a hardware shop which ones suit your wall.
- Done! — Your BAGGEBO shelving unit is assembled and fixed to the wall. Turn the feet to level it on an uneven floor. Max load 12 kg per shelf.
BAGGEBO shelving unit (metal, white): questions and answers
How long does it take to assemble the IKEA BAGGEBO shelving unit (metal, white)?
About 30–45 min for 1 person, working through the 8 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the BAGGEBO shelving unit (metal, white)?
Phillips screwdriver, screws and plugs for the wall (not included).
Can one person assemble the BAGGEBO shelving unit (metal, white)?
Yes, it is a one-person build.
Does the BAGGEBO shelving unit (metal, white) need to be fixed to the wall?
The manual shows a wall fixing: see step 6 (Stand it up, hang the wall brackets) and step 7 (Fix it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the BAGGEBO shelving unit (metal, white) once assembled?
60×25×116 cm (23 5/8×9 7/8×45 5/8"), as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the BAGGEBO shelving unit (metal, white)?
46 fittings of 4 kinds, the most numerous being 38 × screw, 4 × levelling foot, 2 × wall bracket. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA BAGGEBO shelving unit (metal, white) assembly instructions PDF?
The official PDF is manual AA-2235400-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 504.811.72; other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-2235400-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 10119123). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BAGGEBO bookcase assembly instructions
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
- IKEA EKET cabinet assembly instructions
All IKEA BAGGEBO assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained