Step by StepAssembly Find your furniture

IKEA EKENABBEN open shelving unit assembly instructions

How to assemble the IKEA EKENABBEN open shelving unit, step by step: 16 animated steps built from the official manual, about 1 hour for 1 person, with Allen key (supplied), Phillips screwdriver, spirit level, drill, wall screws and plugs to suit your wall (not included).

IKEA EKENABBEN open shelving unit, assembled

An open aspen shelving unit with five white shelves: two ladder-like side frames on dowels and screws, shelves bolted between them lying down, then turned over, stood on adjustable feet and fixed to the wall. Size: 70x34x154 cm. About 1 hour, 1 person. Tools: Allen key (supplied), Phillips screwdriver, Spirit level, Drill, wall screws and plugs to suit your wall (not included).

Based on the official IKEA manual AA-2258706-3 (PDF). Guide updated .

EKENABBEN open shelving unit: quick facts
Steps16
Time1 hour
People1
ToolsAllen key (supplied), Phillips screwdriver, Spirit level, Drill, wall screws and plugs to suit your wall (not included)
Size70x34x154 cm
Official manualAA-2258706-3
IKEA article number804.878.13 (aspen white)
Pieces in the box110

In the box

PartPart numberQuantity
Post4
Side crossbar10
Shelf5
Allen bolt10510720
Allen screw1007472820
Adjustable foot1078624
Dowel10134340
Screw1095602
Washer1008232
Angle bracket1027202
Allen key1000011

Steps

  1. Dowels in the crossbars — Lay out the 10 side crossbars, flange up. Push 2 dowels 101343 into each end of every crossbar, in the two holes of the end face: 40 dowels in all.
  2. Posts onto the crossbars — Make the two side ladders. For each one, push a post onto the dowels at one end of 5 crossbars, then a second post onto the other ends. The flanges of the crossbars lie over the posts, facing up.
  3. Screw the ladders together — Drive a screw 10074728 down through each end of every crossbar flange into the post below, with the Allen key: 20 screws in all. Check: Use the screws with the coarse wood thread (10074728) here, not the bolts 105107.
  4. First ladder on its edge, shelves in — Stand one ladder on its edge, crossbar flanges facing inwards. Slide the 5 shelves against it, board under the crossbar flanges, until each rail end touches its post. Bolt each shelf through the upper post with a bolt 105107 and the Allen key.
  5. Second ladder — Stand the second ladder on its edge, flanges inwards, and push it onto the other ends of the shelves, boards under the flanges. Bolt each shelf through its upper post with a bolt 105107.
  6. Turn the frame over — Lift the frame and turn it over about its long side, so the posts without bolts are on top.
  7. Bolts on the left side — Fix the shelves to the upper post of the left ladder: one bolt 105107 into each shelf rail, tightened with the Allen key.
  8. Bolts on the right side — Do the same on the right ladder: 5 more bolts 105107, so all 10 bolts of this step are in.
  9. Adjustable feet — Screw an adjustable foot 107862 into the bottom end of each post by hand, turning it clockwise: 4 feet.
  10. Stand it up and level it — Stand the unit up on its feet where it will go, back towards the wall. Put a spirit level on the top shelf and turn the feet in or out until it is level and steady.
  11. Wall brackets — With the unit against the wall, press an angle bracket 102720 into the corner between each back post and the wall, under the top shelf. Fix it to the post with a screw 109560 and a Phillips screwdriver. Check: EKENABBEN must be fixed to the wall. Over a skirting board the brackets go on the other way round (pages 15-16).
  12. Mark the wall, move the unit aside — Mark the wall through the slot in the wall leg of each bracket. Then move the unit out from the wall and to one side, so you can drill.
  13. Plugs in the wall — Drill a hole at each mark and push in a plug that suits your wall: 2 plugs. Check: Wall screws and plugs are not included: choose ones made for your wall.
  14. Push it back — Slide the unit back in front of the plugs and push it against the wall, so the bracket slots line up with the plugs.
  15. Screw it to the wall — Put a washer 100823 on each wall screw and screw it through the bracket into the plug.
  16. Done! — Your EKENABBEN is assembled and fixed to the wall. Each shelf takes up to 20 kg.

EKENABBEN open shelving unit: questions and answers

How long does it take to assemble the IKEA EKENABBEN open shelving unit?

About 1 hour for 1 person, working through the 16 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the EKENABBEN open shelving unit?

Allen key (supplied), Phillips screwdriver, spirit level, drill, wall screws and plugs to suit your wall (not included). Already in the box: Allen key.

Can one person assemble the EKENABBEN open shelving unit?

Yes, it is a one-person build.

Does the EKENABBEN open shelving unit need to be fixed to the wall?

The manual shows a wall fixing: see step 11 (Wall brackets) and step 12 (Mark the wall, move the unit aside). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the EKENABBEN open shelving unit once assembled?

70x34x154 cm, as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the EKENABBEN open shelving unit?

90 fittings of 7 kinds, the most numerous being 40 × dowel, 20 × allen bolt, 20 × allen screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA EKENABBEN open shelving unit assembly instructions PDF?

The official PDF is manual AA-2258706-3, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 804.878.13 (aspen white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2258706-3. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example allen bolt 105107). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained