IKEA PS cabinet assembly instructions
How to assemble the IKEA PS cabinet, step by step: 18 animated steps built from the official manual, about 45–60 minutes for 1 person, with flat screwdriver, screwdriver for the wall screws.
A white powder-coated steel cabinet that clicks together without screws: two leg frames, a middle frame, side, back and bottom panels, a hooked-on top, two shelves on clips and two locker-style doors on pin hinges. Size: 119x63 cm. About 45–60 minutes, 1 person. Tools: Flat screwdriver, Screwdriver for the wall screws.
Based on the official IKEA manual AA-184475-10 (PDF). Guide updated .
| Steps | 18 |
|---|---|
| Time | 45–60 minutes |
| People | 1 |
| Tools | Flat screwdriver, Screwdriver for the wall screws |
| Size | 119x63 cm |
| Official manual | AA-184475-10 |
| IKEA article number | 102.514.51 (white) |
| Pieces in the box | 28 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Leg frame (rail + 2 legs) | 2 | |
| Middle frame | 1 | |
| Side panel | 2 | |
| Back panel | 2 | |
| Bottom panel | 2 | |
| Top | 1 | |
| Shelf | 2 | |
| Door | 2 | |
| Adhesive strip | 1 | |
| Hinge pin | 114263 | 4 |
| Shelf clip | 114594 | 6 |
| Washer | 110185 | 2 |
| Keys | 142582 | 1 |
Steps
- Middle frame on the back legs — Stand one leg frame (a rail with a leg at each end) upright. Lower the middle frame into the bracket in the middle of the rail. Peel the backing off the adhesive strip and press the strip onto the top bar of the middle frame.
- Front legs — Bring the second leg frame in from the front so that the bracket in the middle of its rail takes the front foot of the middle frame.
- Right side panel — Push the right side panel straight down over the two right leg ends until it clicks onto the rails.
- Left side panel — Push the left side panel down over the two left leg ends in the same way, until it clicks.
- Right back panel — Press the small tab at the top of the middle frame's rear post aside. Lower the back panel behind the rail of the right compartment, then swing its bottom edge in so it sits between the middle frame and the right side.
- Left back panel — Fit the second back panel in the left compartment in the same way.
- Lock the back panels — With a flat screwdriver, twist the 2 tabs at the top of the middle frame's rear post a quarter turn, then the tab at the top of each side panel's rear edge. They hold the back panels in place.
- Left bottom panel — Hold the left bottom panel front-up, hook its rear edge into the back rail, then lower the front edge onto the front rail.
- Right bottom panel — Fit the right bottom panel in the same way. Press both bottom panels down so they lie flat on the rails.
- Hook the top on — Hold the top with its front edge raised and hook its rear edge over the top of the back panels.
- Press the top down — Swing the front of the top down and press it until it clicks onto the side panels and the middle frame.
- Against the wall — The cabinet must be fixed to the wall so it cannot tip over. Push it back against the wall where it will stand. Check: Never climb on the cabinet or let children hang on it.
- Fix it to the wall — From inside, drive a wall screw through the hole near the top of each back panel into the wall. Use round-head screws, not countersunk ones. Check: Wall screws and plugs are not included: choose ones that suit your wall.
- Shelf clips and shelves — Push the 6 shelf clips 114594 into the slots at the same height, 3 per compartment, and press each one down to lock. Slide a shelf onto the clips in each compartment, pushing it to the back.
- Hang the doors — Put a washer 110185 on the hinge hole at the bottom corner. Set the door on it, push a hinge pin 114263 down through the hinge block, then press the pin's arm into the clip on the block. Repeat for the other door.
- Top hinge pins — At the top corner of each door, push a hinge pin 114263 up through the hinge block into the hole in the top, then press its arm into the clip.
- Close and lock — Close both doors. The left door locks with the key 142582 supplied.
- Done! — Your IKEA PS cabinet is ready. Max load: 20 kg per shelf, 60 kg in total.
PS cabinet: questions and answers
How long does it take to assemble the IKEA PS cabinet?
About 45–60 minutes for 1 person, working through the 18 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the PS cabinet?
Flat screwdriver, screwdriver for the wall screws.
Can one person assemble the PS cabinet?
Yes, it is a one-person build.
Does the PS cabinet need to be fixed to the wall?
The manual shows a wall fixing: see step 12 (Against the wall) and step 13 (Fix it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the PS cabinet once assembled?
119x63 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the PS cabinet?
13 fittings of 4 kinds, the most numerous being 6 × shelf clip, 4 × hinge pin, 2 × washer. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA PS cabinet assembly instructions PDF?
The official PDF is manual AA-184475-10, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 102.514.51 (white); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-184475-10. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example hinge pin 114263). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
- IKEA EKET cabinet assembly instructions
- IKEA BRIMNES bookcase assembly instructions
All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained