IKEA LÄCKÖ shelving unit, outdoor assembly instructions
How to assemble the IKEA LÄCKÖ shelving unit, outdoor, step by step: 10 animated steps built from the official manual, about 20–30 minutes for 1 person, with Allen key (supplied), spirit level, screwdriver, drill (for the wall plugs).
A grey powder-coated steel garden shelving unit with four mesh shelves: you screw two side frames onto the back frame with the unit lying on its side, add the glides, stand it up, drop in the shelves and fix it to the wall. Size: 61x32x160 cm. About 20–30 minutes, 1 person. Tools: Allen key (supplied), Spirit level, Screwdriver, Drill (for the wall plugs).
Based on the official IKEA manual AA-417695-10 (PDF). Guide updated .
| Steps | 10 |
|---|---|
| Time | 20–30 minutes |
| People | 1 |
| Tools | Allen key (supplied), Spirit level, Screwdriver, Drill (for the wall plugs) |
| Size | 61x32x160 cm |
| Official manual | AA-417695-10 |
| IKEA article number | 201.518.37 (grey) |
| Pieces in the box | 22 |
In the box
| Part | Part number | Quantity |
|---|---|---|
| Back frame | 1 | |
| Side frame | 2 | |
| Shelf | 3 | |
| Top shelf (shallower) | 1 | |
| Screw | 120940 | 10 |
| Glide | 122168 | 4 |
| Allen key | 100092 | 1 |
Steps
- Back frame onto the left side frame — Lay one side frame flat on a soft surface. Stand the back frame on its long edge behind it, so the 5 tube ends meet the lower post. Push 5 screws 120940 through the post into the tube ends, start them by hand, then tighten each one with the Allen key. Check: Each rung end is shaped to fit the post one way only. Hold the frames together while you start each screw.
- Right side frame on top — Lay the second side frame on top, with its 5 tube ends against the upper post of the back frame. Screw 5 screws 120940 through the post into them and tighten them with the Allen key, as before.
- Screw in the glides — Screw an adjustable glide 122168 by hand into each of the 4 tube ends at the bottom end of the unit: the 2 back posts and the 2 front legs.
- Stand the unit up — Tip the unit up onto its glides so it stands upright, the back frame at the back.
- Put in the shelves — Put the 4 shelves in from the bottom up: hold each one with its back edge raised, set the front edge down between the front legs, then lower the back onto the side rungs. The narrowest shelf goes at the top.
- Level the unit — Put a spirit level on the bottom shelf. Turn the glides in or out until the unit stands level and steady.
- Mark the wall and put in plugs — Stand the unit against the wall and mark the holes of the 2 brackets near the top. Move the unit aside, drill the holes and push in plugs that suit your wall. Check: The unit must be fixed to the wall to stop it tipping over. Wall screws and plugs are not included: choose ones made for your wall material.
- Push it back against the wall — Slide the unit back in front of the plugs and push it against the wall, so the holes in the brackets line up with the plugs.
- Screw it to the wall — Screw a wall screw through each bracket into the plug. Use screws with a flat underside to the head, not countersunk ones.
- Done! — Your LÄCKÖ shelving unit is finished and fixed to the wall. Each shelf takes up to 24 kg. It is made for outdoor use; check the screws now and then and tighten them if needed.
LÄCKÖ shelving unit, outdoor: questions and answers
How long does it take to assemble the IKEA LÄCKÖ shelving unit, outdoor?
About 20–30 minutes for 1 person, working through the 10 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.
What tools do I need for the LÄCKÖ shelving unit, outdoor?
Allen key (supplied), spirit level, screwdriver, drill (for the wall plugs). Already in the box: Allen key.
Can one person assemble the LÄCKÖ shelving unit, outdoor?
Yes, it is a one-person build.
Does the LÄCKÖ shelving unit, outdoor need to be fixed to the wall?
The manual shows a wall fixing: see step 7 (Mark the wall and put in plugs) and step 9 (Screw it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.
What size is the LÄCKÖ shelving unit, outdoor once assembled?
61x32x160 cm, as given for this model. Leave extra floor space around it while you build.
How many screws and fittings come with the LÄCKÖ shelving unit, outdoor?
14 fittings of 2 kinds, the most numerous being 10 × screw, 4 × glide. The In the box table lists every one with its part number, so you can count them before you start.
Where can I download the IKEA LÄCKÖ shelving unit, outdoor assembly instructions PDF?
The official PDF is manual AA-417695-10, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 201.518.37 (grey); other colours have their own numbers but usually the same manual.
Which IKEA manual is this guide based on?
The official manual AA-417695-10. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.
What if a part or screw is missing?
Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example screw 120940). IKEA customer service can send replacement fittings using that number.
Related assembly guides
- IKEA BILLY bookcase assembly instructions
- IKEA KALLAX shelf unit 2x4 assembly instructions
- IKEA BESTÅ frame assembly instructions
- IKEA HYLLIS shelving unit (in/outdoor) assembly instructions
- IKEA LACK wall shelf assembly instructions
- IKEA VESKEN shelf unit assembly instructions
- IKEA EKET cabinet assembly instructions
- IKEA BRIMNES bookcase assembly instructions
All bookcases & shelves assembly guides · All furniture assembly guides
Stuck on a step? Common assembly problems and fixes · Furniture hardware explained