Step by StepAssembly Find your furniture

IKEA NYSJÖN cabinet for washing machine assembly instructions

How to assemble the IKEA NYSJÖN cabinet for washing machine, step by step: 36 animated steps built from the official manual, about 2–3 hours for 2 people, with Phillips screwdriver, flat-blade screwdriver, hammer, pencil, drill with 5 mm bit, clamp and a scrap of wood, wall screws (not included).

IKEA NYSJÖN cabinet for washing machine, assembled

A tall white frame that stands over a washing machine: a cam-lock frame with a back rail built lying on its side, adjustable feet, a nailed-on back, fixing to the wall, two shelves and two hinged doors with knobs. Size: 65x190 cm. About 2–3 hours, 2 people. Tools: Phillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Drill with 5 mm bit, Clamp and a scrap of wood, Wall screws (not included).

Based on the official IKEA manual AA-2247573-5 (PDF). Guide updated .

NYSJÖN cabinet for washing machine: quick facts
Steps36
Time2–3 hours
People2
ToolsPhillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Drill with 5 mm bit, Clamp and a scrap of wood, Wall screws (not included)
Size65x190 cm
Official manualAA-2247573-5
IKEA article number104.964.77 (white)
Pieces in the box82

In the box

PartPart numberQuantity
Side panel2
Top1
Fixed shelf1
Back rail1
Back panel1
Shelf2
Door2
Wall bracket100322742
Screw100488814
Cam screw12349212
Dowel10137510
Cam lock10250912
Insert1014494
Adjustable foot1579674
Nail guide1054941
Nails 101221 (bag of 30)1
Wall plate1536472
Bracket cover100435692
Shelf pin100438268
Hinge1445534
Knob1062662
Bolt1199762
Bumpers 107091 (sheet of 2)2

Steps

  1. Wall brackets on the side panels — Lay both side panels flat on a soft surface, inner faces up. At the top end of each panel, on its back edge, fix a wall bracket 10032274 with 2 screws 10048881.
  2. Cam screws — Screw 12 cam screws 123492 into the small holes on the inner face of the side panels, 6 in each: 2 at the top end, 2 for the fixed shelf and 2 near the back edge for the rail.
  3. Dowels in the top and fixed shelf — Lay the top and the fixed shelf flat, the faces with the large round holes up. Push 4 dowels 101375 into the small holes in the ends of each, 2 at each end.
  4. Top and fixed shelf onto a side panel — The left side panel stays flat, front edge towards you. Stand the top at its upper end and the fixed shelf near its middle, large holes facing out, and push them down onto the dowels and cam screws.
  5. Lock the top at the lower panel — Push 2 cam locks 102509 into the large holes in the outer face of the top, next to the lying side panel, and turn each clockwise with a flat-blade screwdriver to pull the panels tight.
  6. Lock the fixed shelf at the lower panel — Do the same under the fixed shelf: 2 cam locks 102509 in the large holes of its underside, next to the lying side panel, each turned clockwise until tight.
  7. Dowels in the back rail — Lay the narrow back rail flat, the face with the large holes up, and push a dowel 101375 into the small hole in each end.
  8. Back rail onto the side panel — Stand the rail on its long edge at the back of the lying side panel, between the fixed shelf and the bottom end, large holes facing the back, and push it down onto its dowel and cam screws.
  9. Lock the rail at the lower panel — From behind, push 2 cam locks 102509 into the large holes in the back face of the rail, next to the lying side panel, and turn them clockwise to lock.
  10. Put the other side panel on — Turn the second side panel over, inner face down, bracket at the back and at the top end like the first one. Lower it onto the top, fixed shelf and rail so their dowels and its cam screws go into the holes.
  11. Lock the top at the upper panel — Push 2 cam locks 102509 into the top, next to the side panel you just put on, and turn them clockwise.
  12. Lock the fixed shelf at the upper panel — Push 2 cam locks 102509 into the underside of the fixed shelf, next to the upper side panel, and turn them clockwise.
  13. Lock the rail at the upper panel — From behind, push the last 2 cam locks 102509 into the back face of the rail, next to the upper side panel, and turn them clockwise.
  14. Onto its front, inserts in the bottom ends — Tip the frame forward so it lies on its front edges. Push 4 inserts 101449 into the holes in the bottom ends of the side panels, 2 in each, and tap them flush with a hammer.
  15. Adjustable feet — Screw an adjustable foot 157967 into each insert by hand.
  16. Back panel on — Lay the back panel on the back of the cabinet part, between the top and the fixed shelf, so it sits in the rebates of the side panels. Its 2 holes go over the wall brackets.
  17. First nail: shelf end, far side — Push the back panel into the corner at the fixed shelf and the far side panel. Put a nail 101221 in the nail guide 105494, hold the guide on the back panel, hammer the nail down to the guide, pull the guide away and hammer the nail home.
  18. Second nail: top end, far side — Line the back panel up with the top end of the same side panel and nail it there in the same way, with the nail guide.
  19. Third nail: shelf end, near side — Push the back panel flush with the near side panel and nail it at the fixed shelf end. The cabinet is now square.
  20. Nail the back all round — Hammer in the other 27 nails 101221 with the nail guide, all round the back panel: along both side panels and across the top and the fixed shelf.
  21. Stand it up against the wall — With a helper, lift the top end and stand the cabinet up on its feet, turn it to face the room and push it back against the wall where it will stand. Check: Get help to stand the cabinet up: it is 190 cm tall.
  22. Mark the wall — Mark the wall with a pencil through the square hole in each of the 2 wall brackets.
  23. Screws in the wall — Move the cabinet away. Drive a screw with a round (pan) head into each of the 2 marks, leaving the head standing out about 1 cm. Check: Wall screws are not included: choose ones that suit your wall. Use pan-head screws, not countersunk ones.
  24. Push it back onto the screws — Bring the cabinet back in front of the screws and push it straight back against the wall, so the 2 screw heads come through the holes in the back panel and the square holes of the brackets.
  25. Wall plates, tighten the screws — Hook a wall plate 153647 over each screw head inside the brackets. Check that the cabinet stands straight, then tighten both screws with a flat-blade screwdriver so the plates clamp the brackets to the wall.
  26. Bracket covers — Click a cover 10043569 over each of the 2 wall brackets.
  27. Shelf pins — Push 8 shelf pins 10043826 into the holes in the side panels of the cabinet part: 4 at the same height for each of the 2 shelves.
  28. Shelves — Slide the 2 shelves in and lay each one on its 4 shelf pins.
  29. Hinges on the doors — Lay both doors face down. Press 2 hinges 144553 into the round holes along the outer long edge of each door, arms pointing out, and tighten the 2 screws of each hinge cup.
  30. Hang the left door — Hold the left door open beside the left side panel and put its 2 hinge plates against the inside of the panel, at the front holes. Screw each plate on with its 2 screws.
  31. Hang the right door — Hang the right door on the right side panel in the same way, 2 screws in each hinge plate. Check: Once the doors hang, they can be adjusted sideways, in and out and up and down with the hinge screws (manual page 23).
  32. Drill the knob holes — On the inside of each door, mark a point 30 mm from the free edge, half way up. Clamp a scrap of wood to the front behind the mark and drill straight through with a 5 mm bit. Check: Without the scrap of wood behind it, the drill splinters the front of the door.
  33. Knob on the left door — Hold a knob 106266 on the front of the left door over its hole and screw a bolt 119976 into it from the inside.
  34. Knob on the right door — Fix the second knob 106266 and bolt 119976 on the right door in the same way.
  35. Bumpers, close the doors — Stick the 4 bumpers 107091 on the inside of the doors, at the top and bottom of each free edge. Then close the doors.
  36. Done! — Your NYSJÖN cabinet is finished and fixed to the wall. Slide the washing machine in underneath; the shelves can be moved to other heights with the shelf pins.

NYSJÖN cabinet for washing machine: questions and answers

How long does it take to assemble the IKEA NYSJÖN cabinet for washing machine?

About 2–3 hours for 2 people, working through the 36 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the NYSJÖN cabinet for washing machine?

Phillips screwdriver, flat-blade screwdriver, hammer, pencil, drill with 5 mm bit, clamp and a scrap of wood, wall screws (not included).

Can one person assemble the NYSJÖN cabinet for washing machine?

It is planned as a 2-person build. One person can do most of it, but get help for steps 10 and 21, where the furniture is lifted or turned.

Does the NYSJÖN cabinet for washing machine need to be fixed to the wall?

The manual shows a wall fixing: see step 1 (Wall brackets on the side panels) and step 22 (Mark the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the NYSJÖN cabinet for washing machine once assembled?

65x190 cm, as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.

How many screws and fittings come with the NYSJÖN cabinet for washing machine?

69 fittings of 14 kinds, the most numerous being 12 × cam screw, 12 × cam lock, 10 × dowel. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA NYSJÖN cabinet for washing machine assembly instructions PDF?

The official PDF is manual AA-2247573-5, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 104.964.77 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2247573-5. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example wall bracket 10032274). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All IKEA NYSJÖN assembly guides · All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained