Step by StepAssembly Find your furniture

IKEA PLATSA frame assembly instructions

How to assemble the IKEA PLATSA frame, step by step: 12 animated steps built from the official manual, about 20–30 min for 2 people, with screwdriver for the wall screws.

IKEA PLATSA frame, assembled

A tall PLATSA wardrobe frame: click-together panels with no tools, a slide-in back, adjustable wall spacers and wall fixing. Size: 60×55×180 cm (23 5/8×21 5/8×70 7/8"). About 20–30 min, 2 people. Tools: Screwdriver for the wall screws.

Based on the official IKEA manual AA-1914474-9 (PDF). Guide updated .

PLATSA frame: quick facts
Steps12
Time20–30 min
People2
ToolsScrewdriver for the wall screws
Size60×55×180 cm (23 5/8×21 5/8×70 7/8")
Official manualAA-1914474-9
IKEA article number503.309.51 (white)
Pieces in the box27

In the box

PartPart numberQuantity
Side panel2
Top/bottom panel2
Back panel1
Back-panel fastener 151705 +1517068
Wall spacer fitting1506882
Spacer knob1506892
Washer1269162
Cover cap100059052
Connecting bracket 10090922 (joining frames only)2
Screw 146113 (joining frames only)4

Steps

  1. Hook the top panel onto a side panel — Stand one side panel on its long front edge, holes facing in. Hold the top panel upright at the end of the side panel, slide its connectors against the side panel and press it down until the connectors catch in the hooks. Check: Two people. Work on a soft surface. The connectors must point into the side panel, not the other way round.
  2. Add the second side panel — Hold the second side panel above the free end of the top panel and lower it so the top panel's connectors catch in its hooks.
  3. Drop in the bottom panel — Lower the bottom panel in between the two side panels at the other end and press it down until both connectors are hooked in. Check: Check that each connector sits fully in its hook.
  4. Slide in the back panel — With the frame on its front, slide the back panel into the grooves of the side panels from the bottom end, all the way up to the top panel. Check: Check that the back panel is in both grooves along the whole length.
  5. Fix the back panel — Push a plug (151706) through the back panel into each of the 4 holes in the edge of the top panel and the 4 in the bottom panel, then press a pin (151705) into each plug.
  6. Wall spacer fittings — At the top end, push a wall spacer fitting into the two holes on the inside of each side panel, in the gap behind the back panel, with the threaded post pointing backwards.
  7. Stand it up, screw on the knobs — Fit legs now if you use them (sold separately). With two people, tip the frame up over its bottom end. Then screw a spacer knob clockwise onto each fitting at the top of the back. Check: Two people. Lift the frame, don't drag it on its corners.
  8. Set the spacers — Unscrew both knobs a little so they stand out as far as the skirting board is deep. They keep the top the same distance from the wall as the bottom, so the frame stands upright.
  9. Push it against the wall — Push the frame back until its bottom touches the skirting board and both knobs touch the wall. Turn the knobs further if needed.
  10. Check that it is level — Check that the frame stands level and upright; with legs (sold separately), adjust them. If you place several PLATSA frames side by side, line up their tops and join them with the connecting brackets and screws (manual page 14). Check: The 2 connecting brackets and 4 screws are only for joining frames.
  11. Fix it to the wall — Inside, at the top of the back, fix the frame to the wall through each of the 2 holes in the back panel: a washer (126916) and a screw that suits your wall. Then click a cover cap (10005905) onto each washer. Check: Must be fixed to the wall to prevent tip-over. Wall screws and plugs are not included; use ones suitable for your wall.
  12. Done! — Your PLATSA frame is assembled and fixed to the wall, ready for doors, shelves and interior fittings (sold separately).

PLATSA frame: questions and answers

How long does it take to assemble the IKEA PLATSA frame?

About 20–30 min for 2 people, working through the 12 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the PLATSA frame?

Screwdriver for the wall screws.

Can one person assemble the PLATSA frame?

It is planned as a 2-person build. One person can do most of it, but get help for step 7, where the furniture is lifted or turned.

Does the PLATSA frame need to be fixed to the wall?

The manual shows a wall fixing: see step 6 (Wall spacer fittings) and step 11 (Fix it to the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the PLATSA frame once assembled?

60×55×180 cm (23 5/8×21 5/8×70 7/8"), as given for this model. Leave extra floor space around it while you build, and room to lift or stand it up.

How many screws and fittings come with the PLATSA frame?

16 fittings of 5 kinds, the most numerous being 8 × back-panel fastener 151705 +, 2 × wall spacer fitting, 2 × spacer knob. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA PLATSA frame assembly instructions PDF?

The official PDF is manual AA-1914474-9, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 503.309.51 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-1914474-9. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example back-panel fastener 151705). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained