Step by StepAssembly Find your furniture

IKEA SMÅGÖRA shelf unit assembly instructions

How to assemble the IKEA SMÅGÖRA shelf unit, step by step: 17 animated steps built from the official manual, about 30–45 min for 1 person, with Phillips screwdriver, flat-blade screwdriver, hammer, pencil, spirit level.

IKEA SMÅGÖRA shelf unit, assembled

A slim white children's shelf unit with three open compartments: a cam-lock frame built lying on its side, a slide-in back panel, glides, and an adjustable wall fixing hidden under the top. Size: 29×25×88 cm (11 3/8×9 7/8×34 5/8"). About 30–45 min, 1 person. Tools: Phillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Spirit level.

Based on the official IKEA manual AA-2178356-6 (PDF). Guide updated .

SMÅGÖRA shelf unit: quick facts
Steps17
Time30–45 min
People1
ToolsPhillips screwdriver, Flat-blade screwdriver, Hammer, Pencil, Spirit level
Size29×25×88 cm (11 3/8×9 7/8×34 5/8")
Official manualAA-2178356-6
IKEA article number304.654.89 (white)
Pieces in the box71

In the box

PartPart numberQuantity
Side panel2
Top/bottom panel2
Fixed shelf2
Back panel1
Wooden dowel10134516
Cam screw11833116
Cam lock11925216
Glide1226284
Wall bracket1157532
Screw1077164
Wall spacer1106462
Keyhole fitting1036932
Bracket cover1157542

Steps

  1. Cam screws into the side panels — Work on a rug or the cardboard. Lay both side panels flat, inner faces (with the rows of holes) up, and note the groove for the back panel along one long edge. Screw 8 cam screws 118331 into the small holes of each panel, 16 in total.
  2. Top and bottom panels — Push 2 wooden dowels 101345 into each end edge of the top and bottom panels, 8 in total. Stand them on the side panel in front of you, one at each end, grooves at the back and large holes facing in, and press the dowels and cam screws into the holes.
  3. The two fixed shelves — Push 2 dowels into each end edge of the two fixed shelves, 8 in total. Stand them on the side panel between the top and bottom panels, large holes facing the bottom panel like the top panel's, and press them into place.
  4. Cam locks: top end — Push a cam lock 119252 into each large hole next to the lying side panel: 2 in the top panel and 2 in the upper shelf. Turn each one clockwise with a flat-blade screwdriver until it locks onto its cam screw.
  5. Cam locks: bottom end — Lock the lower shelf and the bottom panel to the lying side panel in the same way, 2 cam locks each (8 in total in this step). Check: The cam locks of the bottom panel go into its inner face, facing the lower shelf.
  6. Slide in the back panel — Slide the back panel down into the grooves of the top and bottom panels, behind the two shelves, until it sits in the groove of the lying side panel.
  7. Second side panel on top — Turn the second side panel over, cam screws facing down, and lower it onto the panels so the dowels and cam screws go into its holes and the back panel into its groove.
  8. Cam locks: top end again — Push cam locks into the large holes next to the upper side panel: 2 in the top panel and 2 in the upper shelf. Turn each one clockwise until it locks onto its cam screw.
  9. Cam locks: bottom end again — Lock the lower shelf and the bottom panel to the upper side panel with the last 4 cam locks (8 in total in this step). Check that all 16 cam locks are tight.
  10. Glides — Tap 4 glides 122628 into the bottom ends of the side panels with a hammer, 2 in each panel. Check: Line each glide up with the outer face of the side panel: it must not stick out past the edge.
  11. Stand it up — Stand the shelf unit up on its glides, a little in front of the wall where it will go. Check: Furniture tipping over can injure children. This unit must be fixed to the wall with the fittings supplied.
  12. Wall brackets under the top — Screw a wall bracket 115753 under the top panel at each side, against the back panel, with 2 screws 107716 each. The large hole in each bracket lines up with the hole in the back panel.
  13. Mark the wall — Push the unit back against the wall. Reach through the large hole in each bracket with a pencil and mark the wall. Then move the unit aside.
  14. Wall screws and spacers — At each mark, drive a screw that suits your wall through a spacer 110646 into the wall. Leave 1 cm between the screw head and the spacer. Check: Wall screws and plugs are not included: use ones suited to your wall material. Ask a specialist if unsure.
  15. Hang it on the screws — Slide the unit back in front of the screws and push it against the wall, so each screw head comes through the hole in the back panel and the bracket. Check it stands upright with a spirit level.
  16. Fittings and covers — Hook a keyhole fitting 103693 over each screw head and slide it so the screw sits in the narrow end. Adjust the unit, then tighten the screws with a flat-blade screwdriver. Push a cover 115754 over each bracket. Check: You will have 2 dowels, 2 cam screws, 2 cam locks and a narrow panel left over: they are only needed to combine the unit with the SMÅGÖRA changing table.
  17. Done! — Your SMÅGÖRA shelf unit is finished and fixed to the wall. Check the fixing from time to time, and don't let children climb on it.

SMÅGÖRA shelf unit: questions and answers

How long does it take to assemble the IKEA SMÅGÖRA shelf unit?

About 30–45 min for 1 person, working through the 17 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the SMÅGÖRA shelf unit?

Phillips screwdriver, flat-blade screwdriver, hammer, pencil, spirit level.

Can one person assemble the SMÅGÖRA shelf unit?

Yes, it is a one-person build.

Does the SMÅGÖRA shelf unit need to be fixed to the wall?

The manual shows a wall fixing: see step 12 (Wall brackets under the top) and step 13 (Mark the wall). Use screws and plugs that suit your wall (wood, brick, concrete or plasterboard), and ask at a hardware store if you are not sure. Tall furniture and drawer units that are not fixed to the wall can tip over.

What size is the SMÅGÖRA shelf unit once assembled?

29×25×88 cm (11 3/8×9 7/8×34 5/8"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the SMÅGÖRA shelf unit?

64 fittings of 9 kinds, the most numerous being 16 × wooden dowel, 16 × cam screw, 16 × cam lock. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA SMÅGÖRA shelf unit assembly instructions PDF?

The official PDF is manual AA-2178356-6, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 304.654.89 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-2178356-6. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example wooden dowel 101345). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained