Step by StepAssembly Find your furniture

IKEA TROFAST frame assembly instructions

How to assemble the IKEA TROFAST frame, step by step: 15 animated steps built from the official manual, about 45–60 min for 1 person, with Allen key (included), Phillips screwdriver.

IKEA TROFAST frame, assembled

Low kids’ storage frame with two dividers and 18 box rails for TROFAST slide-in boxes, built upside down with dowels and allen-key screws. Size: 99×44×56 cm (39×17 3/8×22"). About 45–60 min, 1 person. Tools: Allen key (included), Phillips screwdriver.

Based on the official IKEA manual AA-344735-4 (PDF). Guide updated .

TROFAST frame: quick facts
Steps15
Time45–60 min
People1
ToolsAllen key (included), Phillips screwdriver
Size99×44×56 cm (39×17 3/8×22")
Official manualAA-344735-4
IKEA article number801.538.00 (white)
Pieces in the box111

In the box

PartPart numberQuantity
Side panel2
Top / bottom panel2
Divider2
Short rail6
Long rail (plinth)2
Dowel10135036
Long dowel1013548
Screw10022916
Allen key1000061
Box rail12005618
Screw10034918

Steps

  1. First divider and two short rails — Stand one divider on its edge. Push the 4 long dowels (101354) through the holes near its lower corners, then press two short rails onto the dowels on one side, one at the front and one at the back. Check: Use the long dowels 101354 here, not the short 101350 ones. Work on a rug or the empty box to avoid scratches.
  2. Second divider — Push 4 more long dowels (101354) into the free ends of the two short rails, then press the second divider onto them. The dowels go right through it. Check: Again use the long dowels 101354.
  3. Onto the top panel — Push 4 dowels (101350) into the ends of the dividers that rest on the floor. Lay one big panel flat, then lift the divider unit and lower it onto the panel so the dowels go into the holes. This panel becomes the top of the frame.
  4. Four more short rails — Slide the remaining 4 short rails onto the long dowels sticking out of the outer faces of the dividers, front and back, on both sides.
  5. Second big panel on top — Push 4 dowels (101350) into the top ends of the dividers and lower the second big panel onto them. This panel becomes the bottom of the frame.
  6. Screw the panel to the dividers — Fasten the panel to the two dividers with 4 screws (100229), two per divider, using the allen key.
  7. Long rails (plinth) — Push 4 dowels (101350) into the holes along the front and back edges of the panel, then press the two long rails onto them, standing on edge.
  8. First side panel — Push 12 dowels (101350) into the holes on one end: 2 into each rail end and 4 into the end of the panel lying on the floor (the panel on top only takes a screw). Press the side panel onto them.
  9. Screw on the first side panel — Fasten the side panel with 6 screws (100229) using the allen key: one into each rail end and one into each big panel.
  10. Second side panel — On the other side, push 12 dowels (101350) into the panel and rail ends and press the second side panel onto them.
  11. Screw on the second side panel — Fasten it with the last 6 screws (100229) and the allen key.
  12. Turn the frame upright — Roll the frame over onto its plinth so it stands the right way up, with the long rails on the floor.
  13. Box rails: right section — Fit 3 box rails on each wall of the right section, ledge at the bottom facing in. Push the peg at the back into its hole, then fix the rail with a screw (100349) using a Phillips screwdriver.
  14. Box rails: left and middle sections — Fit the other 12 box rails the same way, 3 on each wall, each with a screw (100349). That makes 18 rails and 18 screws. Check: The TROFAST boxes are sold separately.
  15. Done! — Your TROFAST frame is assembled. Slide the TROFAST boxes (sold separately) onto the rails. Check: This manual has no wall-fixing step, but children may climb on or pull at storage. If the frame is placed against a wall, consider securing it to the wall with fittings suited to your wall (not included).

TROFAST frame: questions and answers

How long does it take to assemble the IKEA TROFAST frame?

About 45–60 min for 1 person, working through the 15 steps of this guide. Unpack and sort the hardware first: the In the box list has every part with its count, so you can check nothing is missing before you start.

What tools do I need for the TROFAST frame?

Allen key (included), Phillips screwdriver. Already in the box: Allen key.

Can one person assemble the TROFAST frame?

Yes, it is a one-person build.

What size is the TROFAST frame once assembled?

99×44×56 cm (39×17 3/8×22"), as given for this model. Leave extra floor space around it while you build.

How many screws and fittings come with the TROFAST frame?

96 fittings of 5 kinds, the most numerous being 36 × dowel, 18 × box rail, 18 × screw. The In the box table lists every one with its part number, so you can count them before you start.

Where can I download the IKEA TROFAST frame assembly instructions PDF?

The official PDF is manual AA-344735-4, free from ikea.com; this guide links it next to the steps. To find the product page with its documents, search ikea.com for article number 801.538.00 (white); other colours have their own numbers but usually the same manual.

Which IKEA manual is this guide based on?

The official manual AA-344735-4. Manuals and fittings change over time, so compare this code with the one printed on your paper manual. If they differ, follow your paper manual.

What if a part or screw is missing?

Check every box and all the packaging first: small fittings are often taped inside. Each fitting in the In the box list has its IKEA part number (for example dowel 101350). IKEA customer service can send replacement fittings using that number.

Related assembly guides

All bookcases & shelves assembly guides · All furniture assembly guides

Stuck on a step? Common assembly problems and fixes · Furniture hardware explained